Visual Signs of Wall Ties Failure

Ancon wall ties play an important role in the construction of any masonry. The job of the wall ties are to tie the visible outer cavity of the wall of the building to its structural and load bearing inner leaf. After a particular period of time, the wall ties corrode and thus its strength loosens up. In such a condition of wall tie failure, the inner as well as the outer leaf of the building become independent of each other. Thereafter, the building becomes structurally unsafe and can be danger for those who are in it and are around it. 

This article focuses around the visual signs of damaged or corroded wall ties in the masonry walls. Take a quick look on these signs:

·         Vertical or horizontal cracks in brickwork: The vertical or horizontal cracks are normally caused due to corrosion of the wall ties. As the wall tie corrodes, the metallic oxide is produced that takes up more than the non-corroded wall tie would require. Thus the bricks that are placed above and below the wall ties are forced apart and therefore cracking the mortar bed. If this issues spread within your property, then you will ultimately notice that it will occur to every six course of the brick that is up to 450mm. 

·         Bulging Brickwork: Bulging brickwork can be seen in the areas where the corrosion of the wall ties and resultant expansion in the masses force the outer skin to either move up or down. If there is no space for the skin to expand, then the brickwork itself bulge outwards causing bulge. 

·         Cracks or Separation of Window Reveals: This is normally seen in the internal walls of the property. When the movement is happened, it causes gaps and cracking that can appear between the window frames and window reveals. In addition to it, the depth of the window reveal can also appear as consistent due to wall ties being corroded. 

·         Lintels lifting or sagging: Due to the wall ties being corroded, the expansion that occurs causes certain amount of movement. This can push up the lintels either upwards or downwards. This same can appear in the window sills. 

It is vital that you notice and take remedial actions for getting the masonry repaired. Today, ancon wall ties are being used in the construction of the building as there’s much increased resistance to rusting and corrosion.

Top Reasons to Live in Sustainable Houses

Most of the cities all over the globe are encouraging building designs that are ecologically well-maintained. The mentality behind building up ecological friendly architectural places is that possess little or no negative impact on the environment. Designing the places with the help of builders merchant Bognor Regis can create the place in such a manner that will provide our future generations a planet worth living in. The sustainable homes are effectively proved as a bridge between ecology and architecture. It encourages the efficient and moderate use of energy and other building materials without damaging the natural resources.

Some of the benefits of living in the sustainable homes are as follows:

·         Increased productivity: Studies prove the fact that by living in the healthy environment, one can be more productive and efficient. Also, by working in the sustainable-developed offices, employees are prone to less sick, absent and also work more in quantity and quality.

·         High Market value: The homes developed in a sustainable manner have a high resale value. It has been proved that the maintenance and utility costs of the sustainable homes are much less of normal built homes. Thus, they are more likely to be purchased at a higher price.

·         Healthy Occupants: According to a recent study by Environmental Protection Agency, the air pollution that is inside a building is worse that outside. Most of the people get triggered by pollutants that are found inside non-green buildings.

·         Easily Availability of Sustainable Building Materials: So as to promote the sustainable buildings, the recycling industries endorse recycled products. Thus, they are easily available. Builders merchant Bognor Regis are in direct contact with the recycling industries for construction purposes. Therefore, architects have a freehand to expand the sustainability of the building.

·         Cost efficient: The homeowners are looking forward for developing a home that can cut down maintenance and utility costs. By using solar panels other cost efficient products, the maintenance and utility costs can be minimized. One might have to make a bigger investment in the beginning, but it will be worth in longer run.

·         Changing Preferences of Consumers: Now days, people are more aware of the damage that can be done to the planet. Still, they aren’t ready to adopt the changes that will improve the condition of planet. But youngsters are more interested in studying and developing sustainable architecture. This way, the youngsters can also bring a change.

In my point of view, this blog will help you to find out the reasons on why sustainable houses are preferred to live. County Supplies has building materials that can help you build a sustainable & perfect house.